T-Hexx Dry External Teat Dip 1ltr

€160.00

* T-HEXX® DRY™ External Teat Dip is designed for use during the dry and pre-calving period of the dairy cow
* Aids in the prevention of mastitis infections caused by bacterial migration into the teat canal
* T-HEXX Dry creates a film forming barrier designed to block outside environmental influences from entering the teat canal during the dry and pre-calving period
* Recommended to be used at dry off and again two weeks prior to calving
* Suggested application at least 3-5 days prior to calving for maximum results

* Benefits –
FILM-FORMING BARRIER – Excellent film-forming barrier ensures the teat remains closed and sealed as long as the barrier is in tact.
UNIFORM BARRIER – Insures the teat is protected from bacteria migration by assisting the natural keratin plug to protect the quarter. The coating dries and securely plugs the teat opening.
EXCELLENT ADHESION QUALITIES – Provides adherence to the teat for up to seven days depending on the bedding and environment.
ECONOMICAL – Low drip means less waste on the parlor floor.
LONGEVITY ON THE TEAT – Depending on the bedding and environment, the barrier will stay in place for up to seven days.
EASY TO SEE BLUE COLOR – As long as the product is visually covering the teat opening, it is still effective.
WATER RESISTANT – Will not run off when exposed to urine, manure, rain, or other environmental conditions.

* Directions For Use –
Use in a well ventilated are. Do not pour unused product back into original container. Keep container tightly closed when not in use. Apply with a disposable 3oz. paper cup.

At Dry Off –
At last milking prior to dry off, milk out cow completely. Infuse dry cow antibiotic into clean, dry teat according to label instructions.
Dip entire length of teat into T-HEXX DRY Teat Dip. For maximum protection, a second application may be applied after the first
coating is dry.

10 Days Prior To Calving –
Clean teat thoroughly and wipe with dry towel. Dip entire length of teat into T-HEXX DRY Teat Dip. Product should remain on teat 3 – 7 days. Observe daily and re-dip if sealant is removed prior to calving. After calving, peel off any remaining teat sealant prior to milking.

In Stock